Feelings of Shimomura
Quality management system
In order to ensure the reliable quality of the Shimomura brand, we have established comprehensive management systems. In addition to rigorous quality checks during each manufacturing process, we have the full range of high-precision inspection equipment. These systems ensure quality from every aspect.
Identification Technology Promises Peace of Mind
Spark inspection (SCM435)
Spark inspection (SUS 420J2)
A grinder is used on the steel material to generate sparks; the material can be identified by the color and shape of the sparks.
Materials Sorting
EC equipment and sorting devices are installed in-line. Materials identification is reinforced by irregularity and defect detection.
X-ray analysis
X-ray analysis equipment was introduced and composition analysis is performed to enhance material identification.
Emission spectroscopy analysis
In addition to material identification through irregularity detecting and X-ray analysis, emission spectroscopy analysis further enhances identification.
Defect Detection System Ensures Safety
Ultrasonic testing detects defects inside products.
Provided by KJTD Co., Ltd.
Vertical: SDH ϕ 0.5 × 10 mm or more; angled: FBH ϕ 0.5 or more
Detects flaws in the surfaces of products.
Figures courtesy of Foerster Japan Limited.
Defect depth: 0.1 mm × Defect length: 10 mm
Internally-Developed Quality Management Equipment
CG Circularity Monitoring Device
Circularity measurements are performed within the CG line, enabling defects to be detected at an early stage.
Circularity measurements are performed within the CG line, enabling defects to be detected at an early stage.
WD Localized Bending Detector
Detects localized bending of coils in the WD line, enabling defects to be detected at an early stage.
Detects localized bending of coils in the WD line, enabling defects to be detected at an early stage.
CM Localized Tapering Detector
Localized tapering is detected in the CM line, preventing release of defective products.
Localized tapering is detected in the CM line, preventing release of defective products.Enhanced High-Performance Inspection Equipment
SEM/EDX analysis device
Digital microscope
Fully-automated hardness tester (Vickers)
Hardness tester (Rockwell/Brinell)
Concentricity gauge
All-purpose tensile strength tester
High-Straightness Products
Short-distance deflection tester
Shimomura has the technological levels to support rigorous straightness requirements.
Quality examples
φ7 ≦0.02mm/150mm
φ5 ≦0.02mm/255mm
φ3 ≦0.01mm/50mm
φ7 ≦0.02mm/150mm
φ5 ≦0.02mm/255mm
φ3 ≦0.01mm/50mm
Automatic cylindricity measuring instrument
Shimomura products have the technological levels to support cylindricity requirements that are stricter than standards (one-half of tolerance).
Quality example
φ10（0,-10）≦4μm
φ10（0,-10）≦4μm
High Circularity Products
Circularity measuring instrument
Shimomura products have the technological levels to support circularity requirements that are stricter than standards (one-third of tolerance).
Quality example
φ6(+6,+2) ≦1.3μm
φ6(+6,+2) ≦1.3μm
High-Precision Control of Surface Roughness of Grinding Products
Surface roughness measuring instrument
Shimomura products have the technological levels to support surface roughness requirements that are stricter than standards (Ry≦3.2μm).
Quality example
φ2 Ry≦1.6μm
φ2 Ry≦1.6μm
Narrow Tolerance Products
Dimension measuring instrument
Drawn products have the technological levels to comply with tolerance requirements that are stricter than standards (h9).
Quality example
φ10 0.010mm / φ1 0.010mm
Gliding products have the technological levels to comply with tolerance requirements that are stricter than standards (h7).
φ10 0.010mm / φ1 0.010mm
Quality example
φ6 0.004mm
φ6 0.004mm